Model: TOTAL THT74166 The hammer head and hammer body are made of high carbon steel material for extreme hardness, good heat resistance, corrosion and rust resistance, has durability and long life. The deformed hammer head, which is stable under load or impact, helps to install and secure nails and ridges on stone or metal surfaces. Professionally designed for users to feel comfortable working with long-handled hammers, which are as tall as the user, and have a soft plastic shell for slip resistance to ensure safety when used. The head and handle are tightly connected. The details are meticulously processed so that it is highly efficient to help you increase productivity.
Model: TOTAL TMTF121006 Fiberglass measuring meter 100 m It has high heat resistance, corrosion resistance and rust resistance. The ruler box is made of durable industrial plastic (fiberglass). In addition to the square, the ruler also has a hanging wire that is convenient to use. The head of the tape measure is integrated with a metal clip, making it easy to pull out when measuring and finished. Very easy to use. The overall steel tape measure uses metric and inch scales, and the details and measurements are clearly printed on the ruler. Allows users to read measurement results easily. The full steel tape ruler makes users feel comfortable with the roll design tape included in the box. It is very elegant and does not disturb the ruler. It features a comfortable rubber handle and a compact design, which helps workers use the measurement in many narrow places, which are difficult to move.
Model: TOTAL TMT710506 Fiberglass measuring meter 50 m It has high heat resistance, corrosion resistance and rust resistance. The ruler box is made of durable industrial plastic (fiberglass). In addition to the square, the ruler also has a hanging wire that is convenient to use. The head of the tape measure is integrated with a metal clip, making it easy to pull out when measuring and finished. Very easy to use. The overall steel tape measure uses metric and inch scales, and the details and measurements are clearly printed on the ruler. Allows users to read measurement results easily. The full steel tape ruler makes users feel comfortable with the roll design tape included in the box. It is very elegant and does not disturb the ruler. It features a comfortable rubber handle and a compact design, which helps workers use the measurement in many narrow places, which are difficult to move
Model: 1500 1/4" air inlet Maximum air pressure: 9.5 bar Air consumption 600 l/min Working pressure 0,5 - 8,5 bar Working temperature 5-60°C Filter grade 5µ Filter capacity 15ml Lube capacity is 25ml
Model: 1503 3/4 inch air inlet Maximum air pressure: 9.5 bar Working pressure 0,5 - 8,5 bar Working temperature 5-60°C Filter grade 5µ Air consumption 2500 l/min Filter capacity 60ml Lubrication capacity 90ml
Model: 1501 3/8" air inlet Maximum air pressure: 9.5 bar Air consumption 1800 l/min Working pressure 0,5 - 8,5 bar Working temperature 5-60°C Filter grade 5µ Filter capacity 60ml Lubrication capacity 90ml
3-leg filter bottle, 65-120 mm Model: JDAI65A2 Brand: TOPTUL – Taiwanese Top Tulle Country of origin: Taiwan
Italian inverter electric welding machine, 170 amp, 220 volt, high quality Model: T 1700 Electricity consumption: 3.2 kVA Open circuit voltage: 85 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 160 amps Machine voltage:- (35% - 150 amps) (60% - 130 amps) (100% - 105 amps) Machine cooling: air fan cooling Wire diameter used: 1.5-4 mm Machine weight: -3.7 kg Welding type: direct current - DC - TIG Accessories specifications:- The machine is equipped with protection circuits. It has welding inclusions
Italian diesel welding machine, 200 amps, 9.5 HP, 1 cylinder engine, 2 electrical outlets, 380 volts and 220 volts Brand: Vimer. Country of manufacture: Italy. Model: GSD 200 Engine capacity: 9.5 hp. Number of cylinders: 1 cylinder. Fuel type: diesel. 2 electrical outlets: 5 kVA - 380 volts - 3 phase. 3 kVA - 220 volts - 1 phase. Welding amp range: 45 – 180 amps Machine load capacity: at 35% load, 160 amps At 60% load, 125 amps At 100% load 100 amps Thickness of welding wire used: 1.5-3.25 mm Accessories specifications:- The machine is mounted on a chassis and wheels. The machine is complete with all welding components (welding tip + ground plier cable + welding plier cable). The machine is driven by a sprinkler. ------- Al-Hurriya Supplies Company --- an authorized distributor of original Fimmer products - beware of imitations!! For further inquiries Mr. Ahmed Saif 00201224733621 - 00201012098265
Diesel welding machine, 300 amps, Italian brand, Fimmer, motor capacity: 18 hp, runs on diesel, 2 cylinders, 2 electrical outlets, 380 volts and 220 volts Brand: Fimmer. Country of manufacture: Italy. Model: GSD 300 Engine capacity: 18 hp. Number of cylinders: 2 cylinders. Fuel type: diesel. 2 electrical outlets: 6.5 kVA - 380 volts - 3 phase. 4.0 kVA - 220 V - 1 phase. Welding ampere range: 45 – 260 amps Machine load capacity: at 35% load, 220 amps At 60% load, 170 amps At 100% load, 130 amps Thickness of welding wire used: 1.5-4 mm Accessories specifications:- The machine is mounted on a chassis and wheels. The machine is complete with all welding components (welding tip + ground plier cable + welding plier cable). The machine is driven by a sprinkler. ------- Al-Hurriya Supplies Company --- an authorized distributor of original Fimmer products - beware of imitations!! For further inquiries Mr. Ahmed Saif 00201224733621 - 00201012098265
Small Italian inverter electric welding machine Electricity consumption: 4.7 kVA Open circuit voltage: 90 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 180 amps Machine voltage: 30% - 180 amps (60% - 155 amps) (100% - 125 amps) Machine cooling: air fan cooling Wire diameter used: 1.5-4 mm Machine weight: -5.1 kg Welding type: direct current - DC - TIG Accessories specifications:- Equipped with protection circuits and welding inclusions
Italian diesel welding machine, Fimmer brand, with a Perkins engine with a capacity of 42 hp, 2 electrical outlets, 380 volts and 220 volts. Brand: Vimer. Country of manufacture: Italy. Model: MTD450 Engine capacity: 42 hp. Engine type: Burkins. Fuel type: diesel. Cooling: water cooling. 2 electrical outlet: 15 kVA, 3 phase. 10 kVA 1 phase. Welding amperage range: 25 – 450 amps Machine load capacity: (35% - 450 amps) (60% - 400 amps) (100% - 300 amps) Thickness of welding wire used: 2-8 mm Accessories specifications:- The machine is loaded on a chassis, wheels and a tensioner to tow the machine. The machine is complete with all components for welding. The machine is driven by a sprinkler. ------- Al-Hurriya Supplies Company --- an authorized distributor of original Fimmer products - beware of imitations!! For further inquiries Mr. Ahmed Saif 00201224733621 - 00201012098265
Italian welding machine, Fimmer brand, 550 amps, English Perkins engine, 51 HP, 4 cylinders, 2 electrical outlets, 380 volts and 220 volts. Brand: Fimmer. Country of manufacture: Italy. Model: 550MTD Engine capacity: 51 hp. Number of cylinders: 4 cylinders. Engine type: Burkins (English). Fuel type: diesel. Cooling: water cooling. 2 electrical outlets: 15 kVA, 3 phase. 10 kVA 1 phase. Welding ampere range: 25 – 500 amps Machine load capacity: at 35% load, 500 amps At 60% load, 450 amps At 100% load, 360 amps Welding ampere range: 25 – 500 amps Thickness of welding wire used: 2.5-8 mm Accessories specifications:- The machine is loaded with a chassis and a tensioner for the diameter of the machine. The machine is complete with all components for welding. The machine is driven by a sprinkler. ------- Al-Hurriya Supplies Company --- an authorized distributor of original Fimmer products - beware of imitations!! For further inquiries Mr. Ahmed Saif 00201224733621 - 00201012098265
Automatic argon welding and electric welding machine Inverter - high quality Electricity consumption: 3.2 kVA Open circuit voltage: 85 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 165 amps Machine voltage:- (60% - 165 amps) (100% - 130 amps) Machine cooling: air fan cooling Wire diameter used: 5.1-25.3 mm Machine weight:- 8.4 kg Welding type: direct current - DC - TIG, working with argon gas Accessories specifications:- The machine is equipped with protection circuits. It has welding inclusions
Italian fimer welding machine, argon and electric welding - automatic argon HF Electricity consumption: 3.2 kVA Open circuit voltage: 85 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 165 amps Machine voltage:- (60% - 165 amps) (100% - 130 amps) Machine cooling: air fan cooling Wire diameter used: 5.1-25.3 mm Machine weight:- 9.7 kg Welding type: direct current - DC - TIG, working with argon gas DIGITAL CONTROL PULS Accessories specifications:- The machine is equipped with protection circuits. It has welding inclusions
