M7 6 mm rocket dies set (15 pieces) - 25,000 rpm, angle 90˚ 1pc Air Grinder (QA-611) 1pc collet (3mm or 1/8 inch) 2pcs spanner 5pcs abrasive stone (3mm or 1/8 inch) 5pcs shank stone (6mm or 1/4 inch) 1pc plug(adapter) Product code: QA-0615A
M7 6mm stencil rocket set (15 pieces) - 25,000 rpm 1pc Air Grinder (QA-111) 1pc collet (3mm or 1/8 inch) 2pcs spanner 5pcs abrasive stone (3mm or 1/8 inch) 5pcs shank stone (6mm or 1/4 inch) 1pc plug(adapter) Product code: QA-0115A
M7 Air Flux Chipper 13*290mm Weight 1.33kg Air Flux Chipper 4000bpm Product code: SN-1032
M7 Air Screwdriver Automatic Detachment 1/4" 1500 RPM (1.0-2.2) Nm Product code: RA-4015
M7 Air Screwdriver Automatic Detachment 1/4" 1700 RPM (0.7-1.5) Nm Product code: RA-3017
M7 Air Screwdriver Automatic Disconnect 1/4" 1100 RPM (1.1-2.1) Nm Product code: RA-3011
M7 crushing hammer with a gun head with a capacity of 3200 strokes/minute Hex Shank Product code: SC-0617C
M7 crushing hammer with a gun head, 2200 blows/minute, Round Shank Product code: SC-0527C
M7 square wrench, 1/2" long handle, torque 610 Nm - 9000 rpm + 2 impact bits Product code: NC-4620QN
M7 stapler, nail size 16, nail length (25 - 50), capacity of 100 nails, weight 2.35 kg Product code: SJ-1650T
M7 stapler, nail size 18, nail length (15 - 50), capacity 100 nails, weight 1.40 kg Product code: SJ-1850F
M7 stapler, staple size 20, staple length (6 - 22), capacity 100 nails, weight 1.20 kg Product code: SU-C1022J
Model: TOTAL TMT2606D Magnetic digital water scale, 60 cm Measures the most accurate degrees of inclination, in degrees, percentages or mm/m - Direction arrows and audio signals at 0° and 90° for easy alignment - Protection class IP 54 - Acoustic signals at 0° and 90° - Two collimators available for use as a water scale - Automatic rotation of measurement values in the display unit while working upside down - equipped with magnets for mounting
.jpg)
