High frequency based inverter with maximum weight capacity. The compact shape makes it easy to carry and bring to any job site. In addition to the high duty cycle The ability to operate the machine on long pipes and welding cables makes this machine a superior welding machine for on- and off-site applications. ESAB ESAB To inquire or inquire about any product Mahmoud Saif 01111264835 Freedom Company for Supplies Alexandria - Mansheya Authorized agent of ESAB
Italian inverter electric welding machine, 170 amp, 220 volt, high quality Model: T 1700 Electricity consumption: 3.2 kVA Open circuit voltage: 85 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 160 amps Machine voltage:- (35% - 150 amps) (60% - 130 amps) (100% - 105 amps) Machine cooling: air fan cooling Wire diameter used: 1.5-4 mm Machine weight: -3.7 kg Welding type: direct current - DC - TIG Accessories specifications:- The machine is equipped with protection circuits. It has welding inclusions
Italian diesel welding machine, 200 amps, 9.5 HP, 1 cylinder engine, 2 electrical outlets, 380 volts and 220 volts Brand: Vimer. Country of manufacture: Italy. Model: GSD 200 Engine capacity: 9.5 hp. Number of cylinders: 1 cylinder. Fuel type: diesel. 2 electrical outlets: 5 kVA - 380 volts - 3 phase. 3 kVA - 220 volts - 1 phase. Welding amp range: 45 – 180 amps Machine load capacity: at 35% load, 160 amps At 60% load, 125 amps At 100% load 100 amps Thickness of welding wire used: 1.5-3.25 mm Accessories specifications:- The machine is mounted on a chassis and wheels. The machine is complete with all welding components (welding tip + ground plier cable + welding plier cable). The machine is driven by a sprinkler. ------- Al-Hurriya Supplies Company --- an authorized distributor of original Fimmer products - beware of imitations!! For further inquiries Mr. Ahmed Saif 00201224733621 - 00201012098265
Diesel welding machine, 300 amps, Italian brand, Fimmer, motor capacity: 18 hp, runs on diesel, 2 cylinders, 2 electrical outlets, 380 volts and 220 volts Brand: Fimmer. Country of manufacture: Italy. Model: GSD 300 Engine capacity: 18 hp. Number of cylinders: 2 cylinders. Fuel type: diesel. 2 electrical outlets: 6.5 kVA - 380 volts - 3 phase. 4.0 kVA - 220 V - 1 phase. Welding ampere range: 45 – 260 amps Machine load capacity: at 35% load, 220 amps At 60% load, 170 amps At 100% load, 130 amps Thickness of welding wire used: 1.5-4 mm Accessories specifications:- The machine is mounted on a chassis and wheels. The machine is complete with all welding components (welding tip + ground plier cable + welding plier cable). The machine is driven by a sprinkler. ------- Al-Hurriya Supplies Company --- an authorized distributor of original Fimmer products - beware of imitations!! For further inquiries Mr. Ahmed Saif 00201224733621 - 00201012098265
Small Italian inverter electric welding machine Electricity consumption: 4.7 kVA Open circuit voltage: 90 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 180 amps Machine voltage: 30% - 180 amps (60% - 155 amps) (100% - 125 amps) Machine cooling: air fan cooling Wire diameter used: 1.5-4 mm Machine weight: -5.1 kg Welding type: direct current - DC - TIG Accessories specifications:- Equipped with protection circuits and welding inclusions
Italian diesel welding machine, Fimmer brand, with a Perkins engine with a capacity of 42 hp, 2 electrical outlets, 380 volts and 220 volts. Brand: Vimer. Country of manufacture: Italy. Model: MTD450 Engine capacity: 42 hp. Engine type: Burkins. Fuel type: diesel. Cooling: water cooling. 2 electrical outlet: 15 kVA, 3 phase. 10 kVA 1 phase. Welding amperage range: 25 – 450 amps Machine load capacity: (35% - 450 amps) (60% - 400 amps) (100% - 300 amps) Thickness of welding wire used: 2-8 mm Accessories specifications:- The machine is loaded on a chassis, wheels and a tensioner to tow the machine. The machine is complete with all components for welding. The machine is driven by a sprinkler. ------- Al-Hurriya Supplies Company --- an authorized distributor of original Fimmer products - beware of imitations!! For further inquiries Mr. Ahmed Saif 00201224733621 - 00201012098265
Italian welding machine, Fimmer brand, 550 amps, English Perkins engine, 51 HP, 4 cylinders, 2 electrical outlets, 380 volts and 220 volts. Brand: Fimmer. Country of manufacture: Italy. Model: 550MTD Engine capacity: 51 hp. Number of cylinders: 4 cylinders. Engine type: Burkins (English). Fuel type: diesel. Cooling: water cooling. 2 electrical outlets: 15 kVA, 3 phase. 10 kVA 1 phase. Welding ampere range: 25 – 500 amps Machine load capacity: at 35% load, 500 amps At 60% load, 450 amps At 100% load, 360 amps Welding ampere range: 25 – 500 amps Thickness of welding wire used: 2.5-8 mm Accessories specifications:- The machine is loaded with a chassis and a tensioner for the diameter of the machine. The machine is complete with all components for welding. The machine is driven by a sprinkler. ------- Al-Hurriya Supplies Company --- an authorized distributor of original Fimmer products - beware of imitations!! For further inquiries Mr. Ahmed Saif 00201224733621 - 00201012098265
Automatic argon welding and electric welding machine Inverter - high quality Electricity consumption: 3.2 kVA Open circuit voltage: 85 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 165 amps Machine voltage:- (60% - 165 amps) (100% - 130 amps) Machine cooling: air fan cooling Wire diameter used: 5.1-25.3 mm Machine weight:- 8.4 kg Welding type: direct current - DC - TIG, working with argon gas Accessories specifications:- The machine is equipped with protection circuits. It has welding inclusions
Italian fimer welding machine, argon and electric welding - automatic argon HF Electricity consumption: 3.2 kVA Open circuit voltage: 85 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 165 amps Machine voltage:- (60% - 165 amps) (100% - 130 amps) Machine cooling: air fan cooling Wire diameter used: 5.1-25.3 mm Machine weight:- 9.7 kg Welding type: direct current - DC - TIG, working with argon gas DIGITAL CONTROL PULS Accessories specifications:- The machine is equipped with protection circuits. It has welding inclusions
DC TIG HF INVERTER 1PH WELDING MACHINE:- Brand: Wimmer Country of manufacture: Italy Model: TT205 Electricity consumption: 5.8 kVA Open circuit voltage: 85 volts Operating current: 220 volts - 1 phase Welding range: from 5 to 200 amps Machine voltage:- (35% - 200 amps) (60% - 170 amps) (100% - 140 amps) Machine cooling: air fan cooling Wire diameter used: 1.5-4 mm Machine weight: -11.6 kg Welding type: direct current - DC - TIG, working with argon gas Equipped with a digital screen Accessories specifications:- The machine is equipped with protection circuits. It has welding inclusions
3*1 multi-purpose welding machine Welding all types of metals and welds Argon welding, electric welding, and C-to-Mig welding Model:-TM236 Welding field: MIG15 - 210 amps TIG 15 – 220 amps MMA 15 – 185 amps Operating current: 0 22V 1 phase Performance cycle: MIG (35%-220V)(60%-160V)(100%-130V) TIG (35%-220V)(60%-160V)(100%-130V) MMA (35%-185V)(60%-138V)(100%-109V) Types of welding performed by the machine: - Mag welding (semi-automatic) with wire reel Welding (argon) Ordinary wire welding Welding quality: DC welding Wire used: 0.6-0.8-1.0-1.2 Machine weight:- 23 kg Screen: LCD 5.7 inches
Italian welding machine for all types of welding, argon welding, electric welding and semi-automatic welding Ready for heavy duty - Italian made by Vimmer brand Model: TM240 Operating current: 220 volts, 1 phase Welding range: 15-235 amps Performance cycle: (220 amps - 35%) (160 amps at 60%) (130 amps at 35%) Types of welding performed by the machine: - Mag welding (semi-automatic) with wire reel Welding (argon) Ordinary wire soldering Welding quality: DC welding Wire used: 0.6 – 0.8 –1.0-1.2 Machine weight:- 35 kg
MIG welding machine, 220 volt, C2 welding of all types of metals, made in Italy Internal wire feeder - practical in use Model TM 260 Electricity consumption: 3.4 kVA Open circuit voltage: 32 volts Operating current: 220 volts - 1 phase Welding range: from 25 to 200 amps Machine voltage: (35% - 200 amps)(60% - 150 amps) (100% - 110 amps) Machine cooling: air cooling by efficient fan Wire diameter used: 0.6 - 0.8 mm Welding type: MIG _ MAG wire reel system Cord supply unit: internal unit Accessories specifications:- MIG welding tool - ground pliers The machine is equipped with protection circuits. The machine is on wheels for easy movement
A multi-use welding machine for argon welding, semi-automatic C2 welding, and electric welding Heavy duty - Italian made Supply voltage 230V 230V MIG-MAG MMA Output range 15 A - 200 A 20 A - 140A Duty Cycle 35% 200 A 140 A 60% 170 A 115 A 100% 130 A 100 A Open circuit voltage 60V 60V Frequency 50 / 60 Hz 50 / 60 Hz Mains fuses (delayed action) 16 A 16 A Max. connected power 4.0 KW 2.9 KW Recommended generator rating 6.7 KW 4.9 KW Cos j 0.7 0.7 Protection classification IP 21s IP 21s Insulation class HH Rolls 2 - Wire speed 2 ÷ 16 m/min - Torch connection Euro Dinse Dinse 50 mm2 50 mm2 Weight 17 Kg 17 Kg Dimensions (WxLxH) 220X560X420 mm 220X560X420 mm Wire 0.6 - 1.0 - Electrode Ø - 1.5 - 3.25 Elettrodo Cell. Ø mm - -
Aluminum inverter argon welding machine Digital control - Italian industry - high quality Electricity consumption: 8.7 kVA Open circuit voltage: 85 volts Operating current: 380 volts - 3 phase Welding range: AC or DC from 5 to 305 amps MMA from 5 to 300 amps Machine voltage: DC(40% - 305 amps) (60% - 255 amps) (100% - 220 amps) AC (40% - 305 A) (60% - 240 A) (100% - 215 A) MMA (35% - 300 A) (60% - 240 A) (100% - 190 A) Machine weight: 33 kg Machine cooling: air fan cooling Wire diameter used: 1.5-6 mm Welding type: DC direct current, AC inverter Type of gas used: Argon, equipped with a 5.7-inch digital screen Accessories specifications:- The machine is equipped with protection circuits and welding inclusions. The machine is suitable for all types of metals and light thicknesses from 2/-30 mm
The 160 amp welding machine from the French brand GYS, model GYSMI 160P, is the ideal choice for professionals and amateurs alike. Thanks to its advanced technology and high specifications, this machine offers you an exceptional welding experience that combines power and efficiency in one portable device. Whether you are working on welding rods up to 4mm or need argon Scratch TIG welding for small thicknesses, this machine has you covered with its unique features and advanced design.
LORRAN ARPF-600210 gas stove heater bulb, 10 kg/h, 108 cm long, made in France, is a distinguished product that combines high performance and superior quality. This bulb is specially designed to provide efficient and rapid heating, making it the ideal choice for kitchens and open areas, as it delivers excellent performance and ensures comfort at any time of the year.
Lorch Handy TIG welding machine German argon welding machine, Lorsch brand, argon welding machine - portable bag welding machine The Lorch Handy TIG series of welding machines at a simple glance is a high-performance machine that is lightweight, guaranteed, very strong and protected from falling with a guarantee up to 80 cm in height. Available in DC - DC/AC HF Remote control manufactured and tested according to DIN EN 60974-1, with CE mark, S-code and IP 23
The Lorch C Dailogo ib welding machine is a series that reflects all the meanings of technology, progress and optimal adaptation. This is because there are engineers who work and think more advanced than others until they design a model that means optimal operation of the machine. Since the beginning of work on the machine, there has been one principle, which is the axis on which this machine was founded, which is (dialogue with the machine). Operating the machine comes in three steps 1 - Selection mode 2 - Determine the wire/gas/material composition 3- Determine welding This machine is the only machine that won the German Federal Prize for Economics and Technology This machine is designed for people or companies that produce high-precision products
We present to you a 10-pack jet heating lamp with a length of 108 cm and a heating pad of 20 cm, model Le Lorrain ARPF-600602, an advanced French product that combines high efficiency and elegant design. This bulb is designed to provide efficient heating in a variety of spaces, making it the perfect choice for home, office, and industrial projects.
Multiple welding machine, C2 welding, electricity and argon, 200 amp inverter, portable bag, digital screen Helvi brand, made in Italy Microprocessor controlled welding inverter suitable for DC controlled MIG/MAG, TIG and STICK welding processes, This ensures excellent welding arc stability and no welding spatter. In STICK mode, The microprocessor controls the Hot Start, Arc Force and Antisticking functions. In TIG mode, It controls the Lift Arc function and in MIG mode allows manual or full synergistic welding. slope drive regulation, Automatic arc soft start wire feeding control. Its simplicity and versatility make it ideal for use in Body shops, workshops and for all maintenance tasks. All functions can be easily identified on the front panel. Digital displays display welding voltage, current and all set parameters.
An electric welding machine designed to work with weak or unstable electricity generated by generators or long power lines Lightweight inverter bag welding machine, 220 volts, 200 amps, heavy duty The machine is made by Italian brand Helvi The machine is distinguished by welding all metals, stainless steel, aluminum and cast iron
Semi-automatic welding machine, internal wire feeder, heavy duty, Italian made, Helvi brand, 300 amps, 380 volts The machine is equipped with a temporary welding system
Italian semi-automatic welding machine, 220 volts, 200 amps It is a single-phase inverter welding unit on wheels with PFC technology (thanks to the very high power factor, It allows 35% energy saving), and is controlled by a microprocessor, And suitable for MIG/MAG (manual, synergistic). It is equipped with two digital displays that make adjustment very easy and intuitive. Ideal for applications in metal welding shops and body shops, especially for welding stainless steel, aluminum and zinc-plated steel. Ideal for use with two welding torches (not at the same time), two gas cylinders (Ar/Co2 and Ar, Ø170mm max for standard arc, And wire nibs (Al and CuSi) allowing simple and quick use. MIG/MAG synergistic welding, The microprocessor allows easy adjustment and optimal arc stability and weld quality, and these generators are equipped with an easy-to-use control panel.
C2 welding machine, 286 amps, 220 volts, internal wire feeder, Helvi brand, Italian industry
A multi-use welding machine with an Italian internal wire feeder for welding all types of metals The UNITECH range was created to simplify the adjustment of welding parameters, making the welding work easier. Each function and parameter can be easily managed and configured thanks to the simplified control panel. UNITECH machines are designed to be used in manual MIG mode. However , Synergistic programs can be activated and selected from the front panel. Thanks to the high duty cycle and easy-to-use control panel, The HELVI UNITECH range is the ideal replacement for the “old” generation transformer welding machines. Innovative "SPEED SPOT" function, Available in all versions of HELVI UNITECH, it ensures perfect spot welding in MIG mode on any material. The HELVI UNITECH range already complies with new eco-design standards regulations.
Discover the power and precision of work with the Indian GUNR U 322 200-200mm sliding milling base. Designed to meet your industrial and professional needs, this base provides exceptional performance thanks to its durable ergonomic design and made of high-quality materials. Whether you work in a small workshop or a large factory, this milling station ensures smooth, accurate results every time. Get the best performance and highest efficiency with Juner!
The 200 amp, 1 phase inverter welding machine, model ECO 200, from the PATON brand, is the ideal choice for you. This machine is considered one of the best options available on the market for various types of work, from industrial welding to small and medium projects, thanks to its advanced technology and durable design. In this article, we will review the most important features that make PATON ECO 200 the first choice for many professionals in the field of welding, highlighting its technical specifications and the superior advantages it offers.
If you are a welding professional or an amateur looking for a highly efficient welding machine, the 200 amp 1 phase inverter welding machine, model PATON ECO 315 DC from the Ukrainian brand PATON, is the ideal choice for you. With the ability to achieve superior welding performance, this machine has advanced technology that provides you with the best and most accurate results. Whether you need to weld stainless steel, aluminum, or other metals, this machine gives you complete control to achieve a clean, strong weld, plus added benefits like energy efficiency and portability. In this article, we will discuss the features of the PATON ECO 315 DC welding machine, why it is the ideal choice for demanding work in the field of welding, and how this machine can help you improve your productivity and performance.
The 250 amp 1 phase inverter welding machine, model PATON ECO 250 DC, is the ideal choice for you. Designed with advanced inverter technology, this machine delivers precise and reliable welding on a variety of surfaces and metals, whether you use it in industrial workshops or on mobile projects. In this article, we'll go over everything you need to know about this exceptional product, including its technical specifications, the benefits it offers, and why it should be your first choice for welding work.
In the world of industrial welding, nothing compares to the utmost importance of quality and efficiency. If you are looking for a welding machine that combines high power, excellent efficiency, and modern technology, the 350 Amp 3-phase inverter welding machine, model PATON Standard 350 DC, Ukrainian brand PATON, will be the ideal choice for you. This machine delivers superior performance for all heavy and medium welding applications, from workshops to major construction sites. In this article, we will review the most important features of this wonderful device and how it can contribute to improving productivity and increasing work efficiency. We will also address the common questions that may come to your mind about using this device.
The 150 amp, 1 phase inverter welding machine, model PATON VDI-MINI, from the Ukrainian brand PATON, is the ideal choice. This device offers the perfect combination of high efficiency, compact design, and ease of use, making it the perfect solution for your workshop or personal business. This machine is distinguished by its superior ability to provide strong and precise welding. It also uses inverter technology that gives you excellent performance while saving energy consumption. In this article, we will learn about the most prominent features of this machine and why it is considered among the best in its class. We will also answer some frequently asked questions about the machine and show you how it can add value to your business.
Welding processes are an essential part of many industries, from construction to manufacturing. If you are looking for a powerful and efficient welding machine, the APT 380V 250A inverter welding machine is the perfect solution for you. This machine offers all the features you need to achieve professional results, whether you are a professional or an amateur. In this article, we will go over the main features, technical specifications, as well as frequently asked questions about this machine to ensure you have the best welding experience.
If you are looking for a versatile welder that delivers exceptional performance, the Technomig 200 is the perfect choice for you. Thanks to its power, ease of use, and multi-functionality, you will be able to carry out all your welding work efficiently and quickly. Whether you are a professional or an amateur, you will find this machine an ideal partner in all your work. Feel free to choose Technomig 200 to ensure the best results with the least effort. One year warranty against manufacturing defects makes you confident in your choice.
Argon welding machine digital display Italian - inverter - high quality Electricity consumption: 18 kVA Open circuit voltage: 85 volts Operating current: 380 volts - 3 phase Welding range: from 5 to 420 amps Machine voltage:- (60% - 420 amps) (100% - 350 amps) Machine cooling: air fan cooling Wire diameter used: 1.5-80.00............mm Machine weight: -31 kg Welding type: direct current - DC - TIG, working with argon gas Equipped with a digital screen Accessories specifications:- The machine is equipped with protection circuits. It includes welding components, a grounding plier with the cable + a protection sleeve + a torch + a regulator.
Argon welding machine model TIG TT305 Italian - inverter - digital screen Digital control Electricity consumption: TIG 5.4 kVA – MMA 7.7 kVA Open circuit voltage: 85 volts Operating current: 380 volts - 3 phase Welding range: TIG from 5 to 305 amps / - MMA from 5 to 300 amps Machine voltage:- TIG (40% - 305 amps) (60% - 255 amps) (100% - 220 amps) MMA (35% - 300 amps) (60% - 240 amps) (100% - 190 amps) Machine cooling: air cooling by efficient fan Machine weight: -28 kg Welding type: direct current - DC - TIG Type of gas used: argon Equipped with a 5.7-inch digital screen Accessories specifications:- The machine is equipped with protection circuits. It has welding inclusions
-1000x1000w.png)
